Peripherals
Electric Cabinet Fan
19″ CoolRaC Cabinet Exhaust Fan 80mm / 3″ – 2 Units per cabinet section – 24 in total – NEW quiet exhaust fan unit has been designed to be fitted into sealed wooden cupboard style equipment enclosures, and enclosed equipment racks where hot air is not being expelled. These type of situations invariably cause thermal failure, as the in-board fans are just recycling hot air.
Temp sensor inc.
Each supplied with PSU.
Product code:
- CP-1690
Single Arm Desk Mount
The BT7372 is a single arm desk mount made from durable aluminium with an anodised, polished finish. Suitable for use with screens up to 32″, the arm features two swivel points plus 360° screen rotation at the interface, making this desk mount perfect for portrait or landscape mounting. The mount can be easily fixed to the rear or side of a desk or through a grommet hole and the integrated cable management ensures a neat and tidy installation.
Product code:
- BT7372
B-Tech premium double screen desk mount
Designed for 2 screens up to 24″ (61cm) / 9kg (20lbs)
Integrated cable management. Fits screens with VESA mounting patterns: 75 x 75 and 100 x 100. Maximum extension: 457mm. Easy tilt adjustment +/- 40 Degree . Easy height adjustment using tool-less locking ring. Desk clamp and grommet fixings included.
Product code:
- BT7374
B-Tech full motion double arm screen desk mount
Designed for screens up to 24″ (61cm) / 9kg (20lbs)
Integrated cable management. Fits screens with VESA mounting patterns: 75 x 75 and 100 x 100. Features 3 swivel points: 360 degree pole, 360 degree at pivot and 180 degree at interface. Maximum extension: 560mm. Easy tilt adjustment +/- 40 Degree. Easy height adjustment using tool-less locking ring. Desk clamp and grommet fixings included.
Product code:
- BT7383
B-Tech full motion double screen desk mount
Designed for screens up to 24″ (61cm) / 9kg (20lbs)
Integrated cable management. Fits screens with VESA mounting patterns: 75 x 75 and 100 x 100. Features 3 swivel points: 360 degree pole, 360 degree at pivot and 180 degree at interface. Maximum extension: 560mm. Easy tilt adjustment +/- 40 Degree. Easy height adjustment using tool-less locking ring. Desk clamp and grommet fixings included.
Product code:
- BT7384
Quadra open frame equipment rack – Flat packed
The lightweight and robust open frame 19″ rack
Designed for 19″ standard rack plates. Steel frame work powder coated black. Earth bonding studs in the base. Comes flat packed in a box with all fittings.
Racks can be bolted together to make one tall rack. 4x holes in all 4 corners for carpet castors or fixing a rack onto another rack.
Includes 2x cable steel trays.
Standard fitment for cage nuts and bolts (not supplied)
Specifications
Q10UOFR – (wxhxd) 495mm x 510mm x 485mm (frame weight 7.25kg)
Q12UOFR – (wxhxd) 495mm x 598mm x 485mm (frame weight 7.5kg)
Q16UOFR – (wxhxd) 495mm x 775mm x 485mm (frame weight 8.25kg)
•These equipment racks are available for next day dispatch
Product code:
- 10UORF
- 12UOFR
- 16UOFR
Quadra pull out open frame rack drawer 360
The Quadra equipment rack drawer is on easy run glides which have a quick release catch for easy removal with a 360 degree turn table with lock.
The drawer also benefits from a 360 degree turn table which is lockable via a cabinet key, this design feature enables access to the back of the equipment for service.
This enables the integrator easy access to the equipment within the lectern or cabinet.
The benefits of using this drawer are serviceability or hot swap in case of equipment break down and installation. Finished in black powder coat.
If you would like to be able to utilise one of our Quadra open frame equipment racks above, we can design any of our wooden lecterns to accommodate this pull out equipment drawer. Our design team will be pleased to work up a 3D visual and quote.
Product Code:
- QCREVOLVETRAY
Open frame rack sleeve
These wood sleeves allow the above open frame racks to be clad in a standard melamine or veneer. The sleeve has a base, top and 2 sides. We can make the sleeve deeper to allow a back and a door if required.
If this is of interest please enquire on a design and price.
Image shows a Quadra 16u open frame rack. Rack is supplied separate (see above)
Product Code:
- 10UOFRBOX-MEL
- 10UOFRBOX-VEN
- 12UOFRBOX-MEL
- 12UOFRBOX-VEN
- 16UOFRBOX-MEL
- 16UOFRBOX-VEN
Under desk cable tower
The tower is manufactured out of 18mm mdf and all 4 sides clip together which means it is easier for install. To the top and bottom on the 200mm wide end panels are cable access holes 100mm x 30mm.
Finished in standard melamine, if you require a special finish please let us know and we will quote accordingly.
Product Code:
- TOWER2
Wall mounted fixed glass VC shelf
This is a toughened glass semi circular shelf
There are 2x wall mounting brackets to fit to the wall.
Product Code:
- GLASS-SHELF
- Approximate size (mm)
- 400 x 200 (WxD)
Folding laptop shelf
Folding laptop shelf for your lectern or cabinet.
These can be in a standard melamine or veneer to match the lectern / cabinet. Under the folding laptop shelf we can cut into the side of the lectern or cabinet holes for either single gang or double gang cut outs for dry line backing boxes (backing boxes, plates etc to be fitted and supplied by the AV integrator)
We manufacture a wall mounted folding laptop shelf which has a wooden back plate.
Product Code:
- LTS01-MEL
- LTS01-VEN
- WM-LTS01-MEL (wall mounted)
- WM-LTS01-VEN (wall mounted)
- Approximate size (mm)
- 18 x 440 x 555 (ThxWxD)
Credenza with Piqo screen mount
Fixed shelf for your video conference camera.
These can be in a standard melamine or veneer to match any lectern / cabinet Quadra supplied.
This is a standard item but we can manufacture different sizes bespoke to you.
Product Code:
- VCSHELF-MEL
- VCSHELF-VEN
- Approximate size (mm)
- 250 x 550 x 350 (HxWxD)
Danby replacement front door
Danby replacement door comes without handle, lock and hinges.
Product Code:
- DANBY-DOOR-MEL
- DANBY-DOOR-VEN
Swainby replacement top only
Swainby replacement top only.
Product Code:
- SWAINBY-W/TOP-MEL
- SWAINBY-W/TOP-VEN
Speaker pattress
Plywood or MDF speaker pattress.
These are 595 x 595 to fit on top of a suspended ceiling tile. We will cut a hole into the centre of the pattress so you can fit your ceiling speaker into the soft tile without damage to the back of the tile. Cut-out size will need to be confirmed at point of order.
Product Code:
- SPKPATT
- Approximate size (mm)
- 6 x 595 x 595 (HxWxD)
Wall pattress
MDF melamine wall pattress.
These wall pattresses are for when you are mounting a screen or projector onto a plaster board wall. These will span the wall and you will be able to fix into the uprights within the wall and spread the weight over a larger surface area. Please confirm the finish when ordering. If you require an alternative size not listed below please let us know and we will supply you a quote. These pattresses are made from 18mm MDF and finished in a standard melamine with ABS/PVC edging all around.
Product Code:
- 400x400x18PAN-MEL
- 600x300x18PAN-MEL
- 1650x1250x18PAN-MEL
- 1800x1200x18PAN-MEL
Cable grommets – nickel
Desk cable tidies keep computer, telephone and other cables tidy around the work space.
Slim grommet with brush insert. Matt Nickel plated. 80mm diameter.
Product Code:
- 80MMGROM-NP
Cable grommets – plastic
Desk cable tidies keep computer, telephone and other cables tidy around the work space. Plastic ABS.
Black, Dark Brown, Light Brown. Light Grey, White.
80mm diameter.
Product Code:
- 50MMGROM-BLK (black)
- 80MMGROM-BLK (black)
- 80MMGROM-WH (white)
- 80MMGROM-L/GREY (light grey)
- 80MMGROM-L/BROWN (light brown)
- 80MMGROM-D/BROWN (dark brown)
Carpet castors
Carpet castors which are 85mm tall, these are swivel castors for ease of manoeuvring.
We can supply 4x non-locking or we can supply you 2x non-locking and 2x locking.
Product Code:
- CASTORPACK (4x non locking)
- CASTORPACK-L (4x but 2x locking)
Packing crate
If you are shipping equipment abroad or even within the UK, Quadra can manufacture a wooden packing crate to your requirements.
This can be collected this from Quadra or we can arrange for it to be delivered to you at cost, please asked for details.
Product Code:
- CRATE
Routing
We offer a custom routing service for insetting AV connection ports into existing furniture.
Product Code:
- ROUTING